Años de investigación y desarrollo han llevado a Meyer al área nueva y en rápida expansión del chorro de agua. This has led to advancements in waterjet hole drilling, hole shaping, surface preparation, coating removal, and many more specialized capabilities. Meyer puede ayudarlo con cualquier necesidad de chorro de agua relacionada con turbinas.
The Aeroespacial y Turbina de gas Industrias han necesitado largo un proceso que puede máquina caliente componentes de la sección que tienen un revestimiento no conductor. Waterjet is a great solution for precision drilling, cutting, and coating removal on these component types.
Meyer tiene movimiento de 6 ejes en todas las máquinas de chorro de agua. Combine estas máquinas con las poderosas capacidades de inspección que ya están en uso en Meyer, and any application is possible.
Precision Waterjet Processes:
Corte / Microcorte
We have cut as thick as 22″ thick carbon steel and as thin as 0.005″ thick Hastalloy X. We can cut simple, flat plate, but also the complex, awkward 3-D shapes of the aerospace industry. We can cut a variety of materials and parts: composites, high-temp alloys, ceramics, coated parts, lab samples, and many more.
- Full 6-Axis CNC movement
- Small to large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Renishaw probing abilities for dynamic programming on complex geometries
- Tolerances as small as ±0.001″
- www.microwaterjet.com
Stripping/Milling
We have stripped diffusion coatings (including the diffusion layer) from gas turbine components. We are able to surface mill to a specified depth, even on complicated geometries. Cracks on worn components can be virtually erased with the waterjet process.
- Full 6-Axis CNC movement
- Small to Large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Non-destructive in-process inspection methods
- X-Ray fluorescent
- Ball micrometer
- Ultrasound
- Edy current
- Heat tint
- X-Ray
- Inspección de Penetrantes Fluorescente (FPI)
- Tolerances as small as ±0.001″
Surface Prep
- We have a rotary nozzle water-only process that is able to clean or prepare surfaces
Hole Drilling
- Hole diameters as small as 0.013″ to as large as 0.060″ or more
- Depths can reach several inches, dependent on hole size, taper allowance, and material
- Ceramic coatings with varying thicknesses can easily be drilled through
- Possible angles range from 30° – 90° from surface
- Full 6-Axis CNC movement
- Small to large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Accurate tolerances as small as ±0.001″ on diameter
- True position as low as 0.010″ on existing parts
- Vision machine correlation
- Taper as small as 0.001″ or less for thinner materials
- Hole drilling into cavities is possible
- Shaped holes based on customer specifications
Hole Clearing
- Vision machine correlation
- Ceramic coatings with varying thicknesses can easily be cleared
- Full 6-Axis CNC movement
- Small to large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Shaped holes can also be cleared