Testowanie Airflow

• Meyer opracował swój pierwszy system przepływu powietrza w 1979 and has flowed thousands of blades and vanes since.
• System is designed, built and, tested to comply with the international standards for Laboratory Equipment Safety, EN61010-1 and Laboratory Equipment Electromagnetic Compatibility, EN61326-1.
• Primary flow standards are maintained by the Flow Measurement Center (FMC) and calibrated directly by the National Institute of Standards and Technology (NIST) in conjunction with OEM flow labs. Uncertainty in primary flow standards is ±0.07% to ±0.12%, k=2.

Stojaki do przepływu powietrza firmy Meyer mają kilka zalet:

• Available for purchase or lease
• On-site support for training and service
• Regularne aktualizacje w ramach programu ciągłego doskonalenia firmy Meyer.
• These systems create value by reducing the cost of ownership without sacrificing performance.
• They promote continuous improvement using built-in statistical process controls and enterprise-wide access to test data.
• They deliver a standard work environment in a small footprint and a user-friendly turnkey system.

Stanowiska przepływu powietrza firmy Meyer są dokładne:

• Accuracy assured by using a combination of sonic nozzles, state-of-the-art instrumentation, and time-proven proprietary software.
• Uncertainty in reported flow rates is ±0.37% to ±0.61%, k=2.
• Capable of flow rates of 0.00006 to 1.5 Lbm/sec.

Efektywny obszar przepływu

Meyer ma możliwość wykonania Efektywnego Obszaru Przepływu (POSIADAMY) measurements on a variety of parts including turbine vane rings, turbine vane segments, and fuel nozzles.

• Area – 0.10 to 40 square inches
• Inlet pressure – 1 to 10 inches of water
• Dew/frost point corrections performed during testing
• Fleming rig tooling compatible
• EFA testing per customer requirements and correlated as needed

Accurate measurements are traceable to the International System of Units (SI) through an unbroken chain of comparisons to a National Metrology Institute (NMI), such as the National Institute of Standards and Technology (NIST), which are signatories to the International Committee for Weights and Measures (CIPM) Mutual Recognition Arrangement (MRA), or the International Bureau of Weights and Measures (BIPM).

Click for Customer List

1. Advanced Turbine Products
2. Alstom
3. General Electric Aviation
4. General Electric Energy
5. General Electric Nuovo Pignone
6. Honeywell International Inc.
7. Jet Avion Corporation, Heico Parts Group
8. MTU Aero Engines
9. Power Systems Mfg, LLC
10. Pratt & Whitney
11. Pratt & Whitney Canada
12. Rolls-Royce Corporation
13. Siemens Energy, Inc.
14. Siemens Westinghouse Power Corporation
15. Snecma Moteurs
16. Solar Turbines
17. Teledyne Turbine Engines
18. The ABB Group
19. United States Air Force Research Laboratory
20. Wood Group

View Detailed
Information