Jahrelange Forschung und Entwicklung haben Meyer in den neuen und schnell wachsenden Bereich des Wasserstrahls geführt. This has led to advancements in waterjet hole drilling, hole shaping, surface preparation, coating removal, and many more specialized capabilities. Meyer kann Sie bei allen Turbinen-bezogenen Wasserstrahlanforderungen unterstützen.
The Luft- und Raumfahrt und Gasturbine Industries sind seit langem ein Verfahren benötigt, die Maschine heißen Abschnitt Komponenten können, die eine nicht-leitende Beschichtung haben,. Waterjet is a great solution for precision drilling, Schneiden, and coating removal on these component types.
Meyer verfügt auf allen Wasserstrahlmaschinen über eine 6-Achsen-Bewegung. Kombinieren Sie diese Maschinen mit den leistungsstarken Inspektionsmöglichkeiten, die Meyer bereits im Einsatz hat, and any application is possible.
Precision Waterjet Processes:
Schneiden / Mikroschneiden
We have cut as thick as 22″ thick carbon steel and as thin as 0.005″ thick Hastalloy X. We can cut simple, flat plate, but also the complex, awkward 3-D shapes of the aerospace industry. We can cut a variety of materials and parts: composites, high-temp alloys, ceramics, coated parts, lab samples, and many more.
- Full 6-Axis CNC movement
- Small to large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Renishaw probing abilities for dynamic programming on complex geometries
- Tolerances as small as ±0.001″
- www.microwaterjet.com
Stripping/Milling
We have stripped diffusion coatings (including the diffusion layer) from gas turbine components. We are able to surface mill to a specified depth, even on complicated geometries. Cracks on worn components can be virtually erased with the waterjet process.
- Full 6-Axis CNC movement
- Small to Large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Non-destructive in-process inspection methods
- X-Ray fluorescent
- Ball micrometer
- Ultrasound
- Edy current
- Heat tint
- X-Ray - Röntgen
- Farbeindringprüfung (FPI)
- Tolerances as small as ±0.001″
Surface Prep
- We have a rotary nozzle water-only process that is able to clean or prepare surfaces
Hole Drilling
- Hole diameters as small as 0.013″ to as large as 0.060″ or more
- Depths can reach several inches, dependent on hole size, taper allowance, and material
- Ceramic coatings with varying thicknesses can easily be drilled through
- Possible angles range from 30° – 90° from surface
- Full 6-Axis CNC movement
- Small to large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Accurate tolerances as small as ±0.001″ on diameter
- True position as low as 0.010″ on existing parts
- Vision machine correlation
- Taper as small as 0.001″ or less for thinner materials
- Hole drilling into cavities is possible
- Shaped holes based on customer specifications
Säuberung der Kühlluftlöcher
- Vision machine correlation
- Ceramic coatings with varying thicknesses can easily be cleared
- Full 6-Axis CNC movement
- Small to large work envelopes (up to 10′ L x 6′ W x 3′ H)
- Shaped holes can also be cleared